Palmer TINO SYSTEM Amp Selecto ...

£169.00 In Stock

Delivery on Thursday

Click and Collect available

Palmer TINO SYSTEM Amp Selector (Pre-Owned)

£169.00

In Stock

Order now for Delivery on Thursday

Make up to 4 payments of £42.25 No fees.
Learn more about Klarna and Clearpay
18+, T&C apply, Credit subject to status.

Delivery on Thursday

With 1 hour Delivery slot

Click & Collect

Live Stock levels from all our stores.

Store
Availability
Edinburgh
In Stock, Collect Tomorrow
Glasgow
Collect on Friday
Newcastle
Collect on Friday
Birmingham
Collect on Friday
Epsom
Collect on Friday
Camden
Collect on Friday

Frequently Bought Together


Total Price: £

Manufacturer's ID: PTINOS

The Palmer TINO SYSTEM - The clever solution for switching two amps to 1 cabinet

Ambitious guitarists often use two amplifiers in order to obtain different basic sounds. However, transport, space restrictions and the decrease in output associated with PA speakers can be very inconvenient. This is where TINO S promises to help. The switcher system allows you to use two amplifiers with only one box as an alternative. Regardless of whether you use tube amplifiers that require getting a load, or transistor models. Even a mixed combination is possible without any problems.

The switch-over between the amplifiers can be operated via a pressure switch on the device or via an optional standard foot switch or switching system. If the switch cannot be done with a switching system, a standard foot switch can be connected to the corresponding 6.3 mm jack. (Requires a switch, not push-buttons!)

TINOS routes the guitar signal to the chosen amplifier, while the second unused amplifier is turned off to prevent unwanted interference. (As if the potentiometer on the guitar was switched off). The gain from the instrument input to output is one (Unity Gain). The built-in buffer only converts the impedance, so that a high-impedance guitar becomes less prone to interference. When the guitar signal is switched, the speaker is switched simultaneously, while the speaker output from the mute amplifier is connected to a load (Dummy Load). Therefore, tube amplifiers are absolutely safe from dangerous idling.

If you connect two amplifiers with one another, a heavy buzzing sound often overlays the guitar signal. This undesirable effect is known as ground loop and occurs between mains-operated devices because of double grounding. The TWO IN ONE prevents this from happening by decoupling the outputs to the amplifiers using high-quality isolating repeaters.A smooth switching between the amplifiers also ensures that the process takes place without crackling in the loudspeaker. The power supply is provided via the supplied 9V power adapter.

Condition Report

At guitarguitar, we award our used gear a grade from 1-5 according to its overall condition, with 5 being the best.

This item was appraised as follows: 

Grade 4 out of 5 - Item shows some mild and/or minor signs of use such as superficial scuffs and marks. The unit functions as it should and is ready to use immediately.

We take care to photograph any features, wear, tear, or modifications you might want to see before you make the decision to buy.

All of our pre-owned electronics are covered by our 3-month warranty and have been inspected and play-tested before resale.