Alesis Strike Amp 8 MK2 Electr ...

£244.00 In Stock

FREE Delivery on Monday

Click and Collect available

Alesis Strike Amp 8 MK2 Electronic Drum Amplifier

£244.00

In Stock

Order now for FREE Delivery on Monday

Includes Christmas Exchange & 3-Year Warranty

We're the first and only UK guitar retailer to offer a 3-year warranty & extended Christmas Exchange as standard.
Buy now and exchange until 31st January 2025

Make up to 4 payments of £61.00 No fees.
Learn more about Klarna and Clearpay
18+, T&C apply, Credit subject to status.

FREE Delivery on Monday

With 1 hour Delivery slot

Click & Collect

Live Stock levels from all our stores.

Store
Availability
Edinburgh
Collect on Tuesday
Glasgow
Collect on Tuesday
Newcastle
Collect on Tuesday
Birmingham
In Stock, Collect Today
Epsom
Collect on Tuesday
Camden
Collect on Tuesday

Frequently Bought Together


Total Price: £

Manufacturer's ID: STRIKEAMP8MK2XEUK

Powerful Partner for Electronic Drums

The Alesis Strike Amp 8 MK2 is a high-performance bi-amped speaker specially designed for Electronic Drums. It outputs a massive 2000 watts, so you have enough headroom for almost any performance or rehearsal. The heavy duty 8” woofer and 1” high-frequency compression driver are tuned for a flat response across the spectrum to deliver the most accurate and authentic representation of acoustic and electronic drum sounds from your instrument. Strike Amp 8 MK2’s performance is exceptional, with a max 130dB SPL and a 52Hz-20kHz frequency range; wide enough to deliver the full thump of your kick drum, right up to the crystal-clear snap of your snare and hi-hats.

All the Connections You Need - including Bluetooth®

Strike Amp 8 MK2 features two combo XLR + 1/4" combo inputs for connecting your electronic drum kit and/or a multipad instrument, each with their own independent volume controls. You can also wirelessly connect a mobile device to the Strike Amp 8 MK2 via Bluetooth, so you can stream music wirelessly while rehearsing or during set breaks. There is also an XLR output for chaining more than one speaker together or sending the signal from your Strike Amp out to a front of house mix.

Adapts to Any Stage or Room

Stages and rehearsal rooms can easily become dense and muddy sounding as lower frequencies from different instruments battle each other; Strike Amp 8 MK2 has a HPF EQ switch to quickly pull troublesome frequencies out and make sure your tone sits perfectly in the mix. Unwanted electrical noise can also be a common problem; Strike Amp 8 MK2’s ground lift switch can eliminate hums and buzzes resulting from ground loops.

Road-Ready Lightweight Design

Strike Amp 8 MK2 is rugged yet lightweight and easy to transport (at 21 lbs. / 9.53 kg) making load-ins at the gig or rehearsal space easier than ever. While you can use Strike Amp 8 MK2 in its intended wedge position, its versatile design means that it can also be used in an upright or pole-mounted position, making it easier to direct your sound wherever you need it, which is especially helpful at outdoor gigs or other places where PA backline is limited.

Specification

Model STRIKE AMP 8 MK2
Output Power 2000 W
Drivers Low-Frequency: 8.0” (203 mm) driver, 2.0” (50 mm) high-temperature voice coil.
  High-Frequency: 1.0” (25 mm) exit ceramic driver with 1.4” (35 mm) coil.
Crossover Frequency 2 kHz
Maximum SPL 130 dB (peak) dB-SPL @ 1 m
Frequency Response 62 Hz – 20 kHz (+/-3 dB)
Frequency Range 52 Hz – 20 kHz (-10 dB)
Horn Coverage 90° horizontal x 60° vertical (nominal)
Connectors (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced)
  (1) XLR output (Link)
  (1) IEC power cable input
Input Impedance Line: 10 KΩ balanced, 20 KΩ unbalanced
Gain/Volume Control Range -∞ to 0 dB, +4 dBu nominal, +10 dBu for max output
HPF Switch 100 Hz
Bluetooth Version: 5.0 | Profile: A2DP, AVRCP | Codec: SBC | Range: up to 100 feet (30.5m)
Power Connection: IEC
  Input Voltage: 100-120V, 50/60 Hz; 220-240V, 50/60 Hz
  Consumption: 1100W
  Fuse: T15AL AC250V; 220-240V T6.3AL AC250V
Protection Electronic clip, thermal, and transducer overdrive protection
Mounting/Installation Standard 36 mm pole socket
Operating Temperature 14°F to 113°F (-10°C to 45°C)
Dimensions (width x depth x height) 10.1” x 9.6” x 17.2”
  256 mm x 245 mm x 436 mm
Weight 21.05 lbs. | 9.5 kg