Suhr microMidi Control

A MIDI controllable footswitch replacement, giving your amps with mechanical footswitches access to MIDI control.

Amplifiers, pedals, or any device that has a footswitch, such as the PT15, or the Suhr Bella can gain the ability to switch amp channels, bypass amp reverb/boost, set delay tap tempos for pedals, and more.*

Easily control the two switches on the TRS jack using MIDI from your MIDI foot controller, your DAW, or other MIDI devices. The Suhr microMIDI Control can also allow you to add control jacks to basic MIDI switchers with no available control jacks.

Connect Any MIDI switching device.

The microMIDI Control can accept either Program Change or Control Change commands and has the ability for momentary, latching, pulse switching, and pre-determined combinations of the two switches.

Connect to Any Amp or Pedal with Mechanical Switching.

Optically isolated, preventing ground loops in systems whose switch control jacks aren’t isolated from the switcher.
Latching (using CC#s), momentary, and pulse options of both TIP and RING switches.

Suhr microMIDI Control. Take Control, Today.

The smallest of its kind available today, making it easier than ever to add to a pedalboard or hidden behind an amplifier.

• Silent and reliable MIDI controllable footswitch replacement for Amps, pedals, and other
  devices.
•  Optically isolated, preventing ground loops in systems whose switch control jacks aren't
  isolated from the switcher.
•  Ability to switch amplifier channels with computer DAW for instant silent switching during
  recording.
•  Adds control jack to MIDI switchers with no available control jacks.
•  Compatible with Program Change (PC) and Control Change (CC) commands.
•  Latching, Momentary (using CC), and pulse options of both switches.
•  4 internal switches to change MIDI Channel (1-16) available on the bottom of PCB when
  the bottom lid is opened.
•  MIDI IN and THRU. The THRU jack is a hardware copy of the MIDI IN jack, eliminating
  latency from software THRU methods.
•  Powered by standard center-negative 9V DC 2.1mm connector power supplies common
  to guitar pedals.
•  Less than 12mA current draw.
•  The smallest solution currently available on the market.

*Amps or pedals that use proprietary circuitry in their footswitches may not be compatible.