QSC GX3 Power Amp

£459.00 Available to Order

QSC GX3 Power Amp

£459.00

Available to Order

Place your order today and we will email you when we have an estimated delivery date.

Includes Christmas Exchange & 3-Year Warranty

We're the first and only UK guitar retailer to offer a 3-year warranty & extended Christmas Exchange as standard.
Buy now and exchange until 31st January 2025

Notify me when in stock

We'll share some similar product recommendations, and if the item does not come back in stock we will let you know.

Manufacturer's ID: GX3

The GX Series is the latest in a long line of hard-working, low cost amplifiers, designed to produce the best possible results for a wide range of users. In most cases, you can plug and play with no surprises, but for best results, we recommend you review the enclosed user guide.

Features
  • Power levels matched to the most popular speakers used by entertainers
  • Optimized for maximum real-world headroom into 4- and 8-ohm speaker systems
  • Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source
  • Outputs: Speakon® combo accepts 1/4" (TS) plugs or Speakon 2- and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems
  • Minimum depth chassis (10.1" / 257 mm) fits in compact, inexpensive effects racks
  • Lightweight - GX3 and GX5 less than 26 lb (12.5 kg). GX7 only 15.5 lb (7 kg)*
  • Detented gain controls for precise setting and matching of sensitivity
  • GuardRail™ automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
  • Front panel LEDs monitor power, signal, and clipping
  • Subwoofer/satellite crossover built-in

* 230V 16.5 lb (7.5 kg)

Register within a month of purchase for extended 6 year warranty.

Specification

Output power per channel  
8 ohms / 1 kHz (both channels driven) 300 W
8 ohms / 1 kHz (single channel driven) 350 W
4 ohms / 1 kHz (both channels driven) 425 W
4 ohms / 1 kHz (single channel driven) 500 W
 
Distortion (1 dB below rated power, 1 kHz) 8 ohms: less than 0.02%
4 ohms: less than 0.05%
Signal to Noise (20 Hz - 20 kHz) 100 dB
Input Sensitivity 1.2 V rms
Voltage Gain 32.2 dB
Output Circuitry Class B
Power Requirements (1/8 power, pink noise at 4 ohms, 120V) 6.3 A
Frequency Response 20 Hz–20 kHz, +0, -1 dB
Dynamic Headroom (4 ohms) 2 dB
Input Impedance Greater than 20 kΩ (balanced)
Maximum Input Level +24 dBu (16 V rms)
Input Connectors (each channel) 3-pin XLR and 1/4-inch TRS, balanced, parallel Phono, unbalanced
Output Connectors (each channel) Speakon®, 1/4-inch, Binding posts
Amplifier and Load Protection Short circuit, open circuit, thermal, RF protection Load protected against DC faults
Front Panel Controls and Indicators Gain controls, 21 detents Red CLIP LEDs, proportional, 0.1% THD threshold Green SIGNAL LEDs, threshold 35 dB below clipping Blue POWER LED, AC on
Rear Panel Controls Full Range / Crossover switch 100 Hz, 3rd order LP (sub), 2nd order HP (top)
Dimensions Height: 3.5-inch (89 mm) 2RU
Width: 19-inch (483 mm)
Depth: 10.1-inch (257 mm)

Register within a month of purchase for extended 6 year warranty.